Using a Moxee Hotspot

Guide to familiarize users with the hotspot device and procedure to connect to its Wi-Fi network, including troubleshooting information for common problems.

Introduction

A Moxee Hotspot is a device you can use to wirelessly connect your computer or tablet to the Internet. It uses the cell phone network to transmit data to and from the Internet and channels that data through a WiFi network, which you can sign in to with your computer or tablet.

Device Operation

1. Press the Power button on the front of the device to turn it on.
2. Once the device is on, press the Menu button on the top of the device repeatedly to cycle through the options. Press the power button to select an option.
3. The device automatically returns to sleep mode after 30 seconds. Press the Power button to wake the device.

The following sections briefly describe each of the available options.

Device Information

This option displays device information, such as device designation and IP address.

 

2.4G WIFI Info

This option displays the network name and password you use to connect to the 2.4G network.

 

5G WIFI Info Menu

This option is not used in standard operation.

 

Device Setting Menu

Device settings may assist with troubleshooting.

 

WPS Active Menu

This option is not used in standard operation.

 

How to Connect to the WiFi Network

1. Press the Power button on the front of the device to turn it on.

 

2. Press the Menu button on the top of the device to navigate through the options until you see the 2.4G Network option.

3. When the 2.4G WIFI Info displays, press the Power button to view the network details.

The display shows the following four lines of text.

• Title
• WiFi Name
• WiFi Security Type
• WiFi Password

4. In your computer or tablet’s network settings, locate and select the WiFi network name displayed on the hotspot device (example circled in red on the illustration shown here).

For general information on how to find your computer or tablet’s network settings so you can connect to a WiFi network, refer to one of the following:

• Android phone or tablet
• iPhone or iPad
• MacBook or iMac
• Windows computer

5. When prompted for a password or security key, enter the WiFi password number displayed on the hotspot device (example circled in red on the illustration shown here).

You have now signed on to the WiFi network.

Troubleshooting

• If it seems as if the WiFi network is not present, make sure you have powered on the device, so that it can generate and transmit the WiFi signal.
• If the device does not turn on, plug in the supplied charging cable, wait a few minutes, and then try again.
• If the WiFi network is available but your computer or tablet cannot sign on to it, make sure you have correctly entered the WiFi password number displayed on your hotspot device (example circled in red on the illustration shown here).

• If you can sign on to the WiFi network, but webpages or other web services (like email) do not respond, make sure both checkboxes in Device Setting are checked.

• Attempt a Hard Reset
  1. Locate the reset button, which is typically a small, recessed button on the side or bottom of the device.
  2. Use a paperclip or similar object to press and hold the reset button for about 10 seconds.
  3. Release the reset button and wait for the device to reboot. This process may take a few minutes.
  4. After the hard reset is complete, you will need to set up your Moxee Mobile Hotspot again, including creating a new Wi-Fi password and configuring any custom settings.
• If a red "x" is displayed in the top left over where the cell connection displays, attempt a Hard Reset.
  • If this does not resolve the issue, please contact the PCC Library for a replacement Hotspot.
• If none of the above resolves the problem, either submit a Report a Device Problem request or call 206-4900 for support.