Switch Inputs on a SMART Interactive Display

Introduction

A SMART interactive display may not automatically boot to the correct input, experience a delay in receiving a video signal, or need to be used with a device that isn't connected through a typical AV system.

Process

To change the input on a SMART interactive display, follow the steps below.

1. On the Home screen, tap Input  to view thumbnails of all the input options.

   OR

   Press the Input  button on the front control panel (or the remote control if your display has one).

   The display shows previews of the devices that are connected to the display's inputs.

   • A gray thumbnail indicates no device is connected to an input.

   • A black thumbnail indicates a device is connected to an input but is in Sleep mode.

   • A thumbnail showing a preview screen indicates an active device is connected to an input.

   • A thumbnail with Touch enabled  indicates a USB cable is connected between the display and device and touch control is available.

2. Tap an input to show on the display.

3. To return to the iQ input, tap the Home button.

   OR

   Press the Input  button on the front control panel until IQ is selected.