Jabra Speak 710 User Guide

Instructions for connecting and using a Jabra speaker/microphone. This model is deployed with Obsbot auto-tracking cameras as a 'Mobile HyFlex' kit to enable blended synchronous instruction when teaching from a video enabled (HyFlex) room is impractical or unavailable.

To connect the Jabra speakerphone with your computer, please follow the steps below.

1.   Plug the supplied Jabra Link 370 Bluetooth adapter into a USB port on your computer. The Jabra speakerphone and the Jabra Link 370 are pre-paired and ready to use out of the box.

   

2. After connecting, go to the audio settings for your computer, and select the Jabra speakerphone as the playback and recording device.

 

How do I link two Jabra Speak 710 speakerphones?

If two Jabra Speak 710 speakerphones are within a 2m/6ft range of each other, the Link button will be visible. To temporarily link the audio between them, press the Link button on both speakerphones.

 

The link will be disconnected if you turn off or enter pairing mode on one of the speakerphones. Afterward, the link does not automatically reconnect. You will need to manually reconnect using the same procedure as above.

To unlink the speakerphones, press the Link button on one of the speakerphones.

Note: If two Bluetooth devices are connected to the Jabra Speak 710, the last connected Bluetooth device will be replaced by the temporary link.

 

How do I set my Jabra device as the default audio device on my Windows computer?

To manually set your Jabra device as the default audio device, follow these steps.

1. In the Windows taskbar, right-click the Sound icon.

 

2. Left-click Playback devices to open the settings. Alternatively, you can open the Windows Control Panel and go to the Sound settings.

 

3. On the Playback tab, select your Jabra device, and click Set Default.
   If you are using a Jabra wireless device, select the connected Bluetooth adapter, such as the Jabra Link 370

4. Repeat step 3 on the Recording tab.
5. Click OK to confirm the new settings.

 

How do I set my Jabra device as the default audio device on my macOS computer?

To manually set your Jabra device as the default audio device, follow these steps.

1. Click the Apple icon at the top left.

 

2. Select System Preferences.

 

3. Select Sound.

 

 

 

 

 

4.  On the Output tab, select your Jabra device.
If you are using a Jabra wireless device, select the connected Bluetooth adapter, such as the Jabra Link 370.

 

 

 

 

5. On the Input tab, select your Jabra device.
If you are using a Jabra wireless device, select the connected Bluetooth adapter, such as the Jabra Link 370.

 

 

 

 

How do I charge the Jabra Speak 710?

1. Plug the Jabra Speak 710 into a USB power source using the attached USB cable. You can plug the cable into a computer or into a USB wall charger.

 

 

The Jabra Speak 710 battery takes approximately 3 hours to fully charge to give up to 15 hours of battery life.